Free The Tone PT-6D / AC POWER DISTRIBUTOR with DC POWER SUPPLY

Ikebe Musical Instruments Store Verified independent store

→

The PT-6D is a high-spec power supply equipped with eight isolated output terminals. It features six DC 9.5V/500mA outputs and two DC adjustable outputs (DC 9V/12V/18V) that allow you to select the output voltage. Despite its compact design that easily fits on an effects board, it features three AC 100V power outlets. All DC9V (DC9.5V) isolated output terminals are capable of supplying the temporary current of 1A or more required by some digital effects pedals during startup, and can also stably supply up to 500mA of current required after startup. *By keeping the height of the main unit to 38mm or less, the overall height can be kept low even when using a large AC adapter. * The three AC100V power outlets on the top of the unit can accommodate the use of the largest AC adapters side-by-side. * Equipped with eight completely independent, isolated output terminals. Two of the eight outputs allow for selectable output voltage. DC 9.5V (500mA) output x 6, DC 9V (500mA) / 12V (375mA) / 18V (250mA) output x 2 *Each DC9V (DC9.5V) output terminal is stabilized and incorporates an independent noise filter and short-circuit protection circuit. *The six DC output terminals are set to an output voltage of approximately 9.5V, reproducing sound quality close to that of a new battery. * All isolated output terminals can supply the temporary current of 1A or more required by some digital effects pedals during startup. (DC adjustable output terminals are compatible when set to DC9V.) * All isolated output terminals are completely independent and electrically isolated, preventing noise from ground loops. This also prevents digital noise from entering via the power line. - AC power distribution terminal - AC100V output: 3 systems, total 6A/600W (maximum) DC output terminal (center negative, center pin diameter φ2.1mm) - Stabilized DC 9.5V isolated output terminals (@500mA MAX): 6 channels - Stabilized DC adjustable output terminals (DC9V@500mA MAX/12V@375mA MAX/18V@250mA MAX): 2 systems -Each output is equipped with a short-circuit protection circuit. - Dimensions: 256(W) x 55.2(D) x 37.6(H) mm (excluding the height of the rubber feet) -Weight: Approximately 595g (excluding accessories) -Accessories: DC cables 30cm L/L x 4, 50cm L/L x 4, dedicated power cable x 1, warranty card, instruction manual *The AC POWERCORD/CP-8137AC, sold separately, can also be used as a power cable. Show more