Our Track Mount Risers will allow you to convert any of our caddy systems from a seat base mount system to a track mount system. Simply attach the riser to the bottom of the caddy system and it can now slide right into any 3'' track system. You can also add one of our Quick Detach Riser Plates, which allows you to easily remove the caddy from the riser with thumb screws. Risers comes with the required stainless fasteners and washers to attach to your unit. You can also attach other boating accessories to these risers. This offers another way to add items to your existing track mount system that may not have an existing attachment solution. Load cannot exceed 20 pounds. It's recommended that you install your track system with bolts and backer plates when using the tall and extra tall models. The taller risers apply a lot of torque on the track system when underway, so bolting your track is best, rather than screwing it on. Choose your riser from the 4 available options. Each option sets the caddy system to a different height. Short - Once installed, this riser will put the top of your standard caddy system 9'' above the mounting surface. The bottom of the caddy system will be 3'' from the mounting surface. We use these short risers with our Multi-Species caddies for easier access to minnows, etc. Keeps the caddy tight to the gunnel. Good for shorter people as well. The riser unit itself is 5.5'' tall. Comes with stainless thumb screws. Standard - Once installed, this riser will put the top of your standard caddy system 11.5'' above the mounting surface. The bottom of the caddy system will be 5.5'' away from the mounting surface. These risers are most common for our track mount models that are mounted to gunnels. This riser unit itself is 8'' tall. Comes with stainless thumb screws. Tall - Once installed, this riser will put the top of your standard caddy system 17.5'' above the mounting surface. The bottom of the caddy system will be 11.5'' above the mounting surface. These risers are used when mounting a caddy system to a back deck. Since decks are much lower than gunnels, this tall riser helps get the caddy up in the air, within easy reach. This riser unit itself is 14'' tall. Comes with locking thumb screws and wrench. Use with track systems that are installed properly, preferably systems that are bolted on, not screwed on. Extra Tall - Once installed, this riser will put the top of your standard caddy system 24'' above the mounting surface. The bottom of the caddy system will be 18'' above the mounting surface. These risers are used when mounting a caddy system to a back deck. Since decks are much lower than gunnels, this extra tall riser helps get the caddy up in the air, within easy reach. This also gets your caddy system above livewell and storage compartment lids. This riser unit itself is 20'' tall. Comes with locking thumb screws and wrench. Use with track systems that are installed properly, preferably systems that are bolted on, not screwed on. Construction Injection Molded Plastic, Aluminum, Stainless Steel Installation Fits any standard 3'' track system Dimensions 6'' x 6'' mount plate. Height varies by model Weight 2-4lbs. Varies by model ** Planer board caddies, tools and accessories in the pictures are not included. This listing is for the riser only. ** We offer shipping to the 48 contiguous states and Canada. Units typically ship within 3 business days of your order being placed.
